Sometimes the best way to remove paint is a stiff, sharp spatula or a blade designed to scrape paint off. The dust is still there, but it's minimized and you have better control than if you were using a sander. If the structure has very loose or crocodile paint, scraping may be the best option. You can also use heat to remove exterior paint from the house.
A heat gun or infrared paint remover will heat the paint so that it comes off the wood effortlessly. This is an excellent technique if you want to avoid sanding after scraping paint or if you don't want to use chemicals. However, care must be taken when using a heat gun. Two concerns are heating old lead paint and releasing it into the air.
In addition, overheating the wood can form embers below the surface and ignite hours later. You can also remove the exterior paint from the house with heat. The paint will be heated with a heat gun or an infrared stripper, so that it peels off the surface without stress. This is an excellent method if you don't want to sand after scraping paint or avoid using chemicals.
In my case, the paint is stained all over the house, which will make sandblasting and sandblasting the preferred option. When I started my summer job, my parents' house already had six or seven different coats of paint. Immediately after removing all the paint from the wall, use clean, warm water to rinse the surface and remove any remaining TSP solution or paint remover gel. In my experience, unless they suffer from specific humidity problems, newer homes (up to 35 years old) are less of a problem than older homes.
The best way to remove exterior paint from the house depends on the condition of the paint, the type of surface and paint, and other variables. New paint will generally not adhere better to bare wood than to an old coat of paint. Dallas Paints will handle all the tasks related to your exterior painting project, including scraping, sanding, priming, priming, pressure washing and painting. The best removal method for exterior paint on a house depends on the condition of the paint, the type of surface, the paint, and other variables.
If you have determined that the paint is failing due to poor preparation or product failure, simply remove and prepare the surface before applying a new coat of paint. Even if the paint isn't peeling off, it's best to prepare the old painted surface with 180-grip sandpaper so that it can give a new base ready for the new paint. I have always been surprised to see workers sanding all the paint on the outside of a house just because some of the paint is peeling off. Paint strippers are generally used on the wall, left to act in their own way and removed with a paint scraper or power tool.
You can peel the coating with grinders and scrapers, or you can use chemicals to dissolve the paint, but the quickest and easiest way to remove paint is to use an infrared thermal stripper.
Leave a Comment